Top Jet Multi

Installation Guide

Have a Looksie (Browse)

How To Install
Go

Zero Fatal Injuries

Reported to date.

SABS Certified

Meets safety standards.

Built-In Safety

Earthing system, pressure switch

Top Jet Multi

Explore trusted Lorenzetti products, available nationwide across South Africa

TOP JET MULTI

Experience the Future of Hot Showers

Maximum comfort and a pleasurable bath from the well-known wall mounted showerheads with a big spreader delivering a larger bathing area for an amazing water jet. Pre-set 04 temperatures offering more confort and economy for all seasons. Practical Controling through button or by an exclusive 30 cm extended pin for easier reach.

A shower that mixes curved and modern lines created by Lorenzetti designers awarded-winning by “Museu da Casa Brasileira” in 2011.

Top Jet shower is compatible with solar water heaters, raising your usage coverage.

Key Features – Top Jet Multi

Offers four pre-set temperature options, ensuring comfort and energy efficiency throughout the year.

Equipped with a big spreader that delivers a larger bathing area for an amazing water jet, enhancing your shower experience.

Features a 30 cm extended pin, allowing easy temperature adjustments within reach, providing convenience during use.

Designed with a cartridge-type heating element that’s easy to access and replace, simplifying maintenance.

🧰 Engineered for straightforward installation, making it user-friendly and time-saving.

🏆 Boasts a design that mixes curved and modern lines, created by Lorenzetti designers awarded by the “Museu da Casa Brasileira” in 2011.

Compatible with solar water heaters, providing versatile installation options and promoting energy efficiency.

🧱 Designed for wall mounting, saving space and offering a sleek appearance in your bathroom.

Constructed with high-quality thermoplastic materials, ensuring durability and longevity.

🌍 Designed to reduce energy and water consumption, aligning with sustainable living practices.

Delivers rapid water heating with power options ranging from 6,000W to 7,200W, ensuring consistent hot water even during peak usage. ​

Its sleek, wall-mounted design saves space and adds a modern touch to your bathroom décor.

Constructed with high-quality thermoplastic materials, the showerhead resists corrosion and is easy to clean, maintaining its appearance over time.

Equipped with internal grounding and electrical insulation that minimizes shock risk and ensures safe operation even in humid conditions — fully compliant with SABS safety standards.

Lorenzetti Heating Element for Top Jet & Advanced Shower – 220V, 6000W

Top Jet multi

How to Replace the Heating Element – Top Jet Multi  

💡 Overview

The Top Jet Multi Temperature Shower offers wide coverage, preset temperature modes, and modern styling. Like all electric showers, its heating element can wear out over time due to water quality or usage. Replacing it is simple if you follow the correct steps — ensuring your shower continues to deliver instant, safe, and efficient hot water.

🧰 What You’ll Need

  • Genuine Lorenzetti Top Jet Multi heating element

  • Insulated screwdriver

  • Rubber gloves

  • Dry cloth or towel

  • Access to DB board and water tap

✅ Step-by-Step Replacement Guide

1. Switch Off Power at the DB Board

  • Cut electricity to the shower by turning off the relevant breaker.

  • Confirm no power is reaching the unit before proceeding.

2. Open the Front Cover

  • Use an insulated screwdriver to remove the screws on the front panel.

  • Gently lift the cover off to access the internal components.

3. Remove the Old Heating Element

  • Locate the cylindrical heating element inside the center of the unit.

  • Unclip or unscrew the terminals (some versions use cartridge-style connectors).

  • Carefully detach the wires and remove the old element.

4. Install the New Heating Element

  • Insert the new Lorenzetti element in the same orientation.

  • Reconnect terminal wires securely.

  • Lock the element in place using clips or screws.

5. Run Water Through the Unit

🚨 IMPORTANT STEP:

  • Turn on the shower tap and let water flow through the unit for 30–60 seconds.

  • This fills the heating chamber and prevents the new element from dry firing and burning out.

6. Reassemble the Shower

  • Replace the cover and reinsert screws evenly. Tighten securely, but do not overtighten to avoid cracking the casing.

7. Restore Power and Test

  • Turn the breaker back on.

  • Open the shower to test temperature response and confirm proper operation.

🛠️ Use Only Genuine Lorenzetti Parts

Only certified Lorenzetti heating elements should be used for the Top Jet Multi. This ensures safety, full compatibility, and long-term durability.

Frequently Asked Questions
Top Jet Multi-Heating Element Replacement

The Top Jet Multi operates between 6,000W and 7,200W at 220–240V depending on the exact model version. Higher wattage means faster heating and better temperature consistency, especially in cold weather or high-flow conditions.

Important: Ensure your DB board and circuit wiring can handle this load — usually a 30A breaker and 4mm² cabling are recommended. Always consult an electrician if unsure.

No. Always switch off the shower before changing temperature settings to avoid internal arcing or damage to the heating element.

Yes. It works with solar water heating systems to supplement heating where solar temperature falls short.

Yes. It performs well even under low pressure — a minimum of 20 kPa (2m head height) is recommended.

If you’re confident with electrical and plumbing safety, yes. Otherwise, hiring a qualified technician is safer and recommended.

Every 2–4 years, depending on usage and water quality. Common signs of failure include no heating or tripping the power.

​

The Top Jet offers preset temperature settings, a wide spray area, and simplified controls — ideal for everyday family use.

It includes grounding, double insulation, and SABS-compliant safety systems to protect against electric shock.

Yes, as long as there’s stable pressure. A booster pump may be required for low-pressure tanks.

Check the power breaker first. If power is active and water is still cold, the heating element likely needs replacing.